Kit Geland II Cruiser 

All New Hammer Transfer Case
Ratio - 1.47:1 Gears - Wide 32P hardened steel gears, - 8 bearings, cast casing
All New R3 Single Speed Transmission
Ratios: Pinion/spur 14/64 = 4.57:1 Internal  1.78:1
Gears - Wide steel 32P, Delrin spur, slipper clutch
All New Cast Yota II Axles
Ratio: 15/40 = 2.67:1
Width at hex 180.5mm
G2 Suspension
Double triangulated 4 Link rear suspension.
3 Link front suspension with panhard bar
Shock Absorbers
Dual Spring 80mm Shocks - Can be oil filled
Type: 1.9 5 lug Wagon Wheels
Hub: Pin type Width: 25mm 
Back spacing: 11mm
Machined billet aluminum, lightweight
G2 Truck Dimensions
Wheels base: 10.83in / 275mm
Length: 18.35in / 466mm
Width: 8.5in / 215mm
Height: 10.6in / 270mm
Ground clearance: 2.3in / 58mm
Final Drive Ratio: 31.9:1 
Weight: 6.57 Lbs / 2.98Kg
What's Included:
  • 1x Gelande II Truck Kit w/Cruiser Body Set
This is a kit that requires building time (appro. 2-3 hours) and electronics
Required to Complete:

Truck Kit
  • Hex Drivers (1.5mm, 2mm, 2.5mm)
  • Long Nose Pliers
  • Associated Thread Locking Adhesive
  • Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)
Body Kit
  • Modeling / Craft Knife
  • Side Cutters
  • Instant glue / Plastic Cement  (prefer non whitening)
  • Hex Drivers (1.5mm, 2mm)
  • Cross Phillips Screwdrivers (small)


Écrire un commentaire

N.B. : Le HTML n'est pas pris en charge!
    Mauvais           Bon

Geland II Cruiser

  • Marque: RC4WD
  • Modèle: RC4WD Geland II Cruiser Body Kit
  • Disponibilité: 2 - 3 Jours
  • 570,00$

Items suggérés

Gen Ace 5000 Mah  50C Hardcase lipo

Gen Ace 5000 Mah 50C Hardcase lipo

2s1p 5000mah

Gen Ace 5000 Mah  50C Hardcase lipo 


Gen Ace 4000 mah 25c 2s1p

Gen Ace 4000 mah 25c 2s1p

hardcase lipo pack 2s

Gen Ace 4000 mah 25c 2s1p